Standard CNC
Plasma Cutting Machines

New Features

  • Micro-joint feature (preventing small parts from falling down by connecting them with the main plate through mini bridges)
  • Optimizing the hole quality by using OPTOHOLE technology.
  • Automatic sheet metal reference point.

Standard Features

  • Steel structure
  • Dual side rack, pinion system AC Servo motor on X-axis and Y-axis.
  • Precision Plasma 130/260 Ampere
  • Standard Marking on Precision Plasma
  • Automatic torch height control
  • Effective cutting without reducing the cutting speed for the vectors which have the same start and end angles. (High speed machining)
  • The ability to go back to any position and resume cutting.
  • Resume feature
  • Working with standard DIN/ISO G Codes.
  • Possibility of working with DXF, ESSI and NC toolpath files.
  • The possibility to override all the parameters while the machine is working.
  • Free AJAN Drawing software.
  • 49 ft/min Rapid Traverse Speed
  • X-axis can be increased upon request.
  • Optional ventilation system

Machine Dimensions

Machine Length (X Axis) Gantry Size (Y Axis)
5 Feet 6.5 Feet 8 Feet 10 Feet 11.5 Feet 13 Feet
10 feet Machine Size (A x C) 11×19 13×19 14×19 16×59
Layout (B x D) 15×23 17×23 18×23 19×23
Machine with Filter (A x E) 11×24 13×24 14×24 16×24
Layout with Filter (B x F) 15×29 17×29 18×29 19×29
13 feet Machine Size (A x C) 11×24 13×24 14×24 16×24
Layout (B x D) 15×28 17×28 18×28 19×28
Machine with Filter (A x E) 11×28 13×28 14×28 16×28
Layout with Filter (B x F) 15×33 17×33 18×33 19×33
20 feet Machine Size (A x C) 11×30 13×30 14×30 16×30 18×30 20×30
Layout (B x D) 15×34 17×34 18×34 19×34 21×34 23×34
Machine with Filter (A x E) 11×34 13×34 14×34 16×34 18×34 20×34
Layout with Filter (B x F) 15×39 17×39 18×39 19×39 21×39 23×39
26 feet Machine Size (A x C) 11×36 13×36 14×36 16×36 18×36 20×36
Layout (B x D) 15×40 17×40 18×40 19×40 21×40 23×40
Machine with Filter (A x E) 11×40 13×40 14×40 16×40 18×40 20×40
Layout with Filter (B x F) 15×45 17×45 18×45 19×45 21×45 23×45
29.5 feet Machine Size (A x C) 11×40 13×40 14×40 16×40 18×40 20×40
Layout (B x D) 15×45 17×45 18×45 19×45 21×45 23×45
Machine with Filter (A x E) 11×45 13×45 14×45 16×45 18×45 20×45
Layout with Filter (B x F) 15×50 17×50 18×50 19×50 21×50 23×50
33 feet Machine Size (A x C) 11×43 13×43 14×43 16×43 18×43 20×43
Layout (B x D) 15×48 17×48 18×48 19×48 21×48 23×48
Machine with Filter (A x E) 11×48 13×48 14×48 16×48 18×48 20×48
Layout with Filter (B x F) 15×53 17×53 18×53 19×53 21×53 23×53
40 feet Machine Size (A x C) 11×50 13×50 14×50 16×50 18×50 20×50
Layout (B x D) 15×54 17×54 18×54 19×54 21×54 23×54
Machine with Filter (A x E) 11×54 13×54 14×54 16×54 18×54 20×54
Layout with Filter (B x F) 15×59 17×59 18×59 19×59 21×59 23×59

Please request layout plan for custom machines

Layout 1 with Jet Filter
Layout 2 with Fan

Technical Specifications

Material Amperage Gas Min. Thickness Piercing Thickness Max. Thickness Plasma cutting gas consumption
Mild Steel 30 AMP O2/O2 0.02″ 0.24″ 0.24″ 36.5 Lt/Min.
40 AMP O2/AIR 0.08″ 0.24″ 0.24″ 4.5 Lt/Min.
80 AMP O2/AIR 0.08″ 0.59″ 0.79″ 10 Lt/Min.
130 AMP O2/AIR 0.12″ 0.98″ 1.18″ 16 Lt/Min.
260 AMP O2/AIR 0.24″ 1.57″ 2.56″ 28.5 Lt/Min.
H35/N2 1.57″ 1.57″ 3.94″
Stainless Steel 45 AMP N2/N2 0.03″ 0.16″ 0.16″ 70 Lt/Min.
F5/N2 0.03″ 0.24″ 0.24″ 9.5 (F5) / 20 (N2) Lt/Min.
80 AMP F5/N2 0.16″ 0.39″ 0.39″ 19 (F5) / 28 (N2) Lt/Min.
AIR/AIR 0.12″ 0.39″ 0.39″
130 AMP N2/N2 0.24″ 0.59″ 0.79″ 78.5 Lt/Min.
AIR/AIR 0.24″ 0.59″ 0.79″
H35/N2 0.39″ 0.79″ 0.98″ 30 (H35) / 48.5 (N2) Lt/Min.
260 AMP AIR/AIR 0.24″ 0.98″ 1.97″
H35/N2 0.39″ 1.57″ 3.94″ 32 (H35) / 123 (N2) Lt/Min.
Aluminum 45 AMP N2/N2 0.05″ 0.16″ 0.24″ 52 Lt/Min.
130 AMP AIR/AIR 0.24″ 0.79″ 0.98″
H35/N2 0.24″ 0.79″ 0.98″ 29 (H35) / 40 (N2) Lt/Min.
260 AMP AIR/AIR 0.24″ 0.98″ 3.94″
H35/N2 0.24″ 1.57″ 1.97″ 35 (H35) / 114 (N2) Lt/Min.

Note: In a 50 liter and 230 bar pressure standard gas cylinder, the gas flow will be 50×230=11,500 liters
For Example: (The Oxygen flow needed for cutting mild Steel with 130 Ampere) 11,500/16
Lt/Min. = 719 minutes = approximately 12 continuous cutting
16 Lt/Min: Cutting gas consumption value from the table

Cutting Angles

According to ISO 9013 standards with a 20 seconds period of linear mild steel, cutting angles are given below.

ISO 9013 Range 3 ISO 9013 Range 4 ISO 9013 Range 5
Angle: 2.86° Angle: 5.71° Angle: 8.81°
Angle: 2.48° Angle: 4.95° Angle: 7.68°
Angle: 1.71° Angle: 3.43° Angle: 5.42°
AJAN PRECISION PLASMA SERIES AJAN P STANDARD CUTTING SERIES OTHER MANUFACTURERS STD. CUTTING SERIES

AJAN Plasma CNC Unit

Standard configuration

  • P3 1.2 GHz Cpu
  • Motherboard with P3 Support
  • 32 MB VGA Card
  • 10/100 Mbps Ethernet Card
  • USB support
  • 128 MB Ram PC133 MHz
  • 80 GB HDD
  • 3.5″ Floppy Disc
  • 17″ LCD Monitor
  • PS/2 mouse
  • Data transfer
  • Local area network
  • USB Flash Disc
AJAN Plasma CNC UnitAJAN Plasma CNC Hand Unit

AJAN Plasma CNC Unit and Hand Unit

Technical specifications

  • All inclusive control panel (Dryer, ventilation, generator, jet filter)
  • Free AJAN CAD program and Geometric Shapes Library.
  • Automatically cutting resume at break point after electricity shut down.
  • Working with standard ESSI, ISO, G codes. DXF files.
  • Leaves kerf width on the program to the cutting process.
  • Free software updates from the internet.
  • Language options as; Turkish and English.
  • Automatically defining the sheet metal angle.
  • The CNC Unit is made completly in AJAN Company so the client can get all his service needs; solutions and spare parts directly from AJAN.
AJAN Plasma Generator

AJAN Plasma Generator

Ajan Electronics produces all machine parts in its own factories; the plasma generator, CNC unit, cutting torch, consumables, servo motors, moving parts, all electronic parts and steel structure, which gives the company a great sales and after sales services advantage.

standard-oxy-cutting-head

Oxy Fuel Cutting Head

ajan-plasma-bevel-cutting-head

Bevel Cutting Head

Bevel Cutting System Features

  • Compact Design
  • The Worlds Lightest Bevel Head
  • Full Collision Protection
  • Beveling Range from 0 to 45 Deg. (0-60 optional)
  • Maximum Rotation Angle 540
  • Change the Cutting from Square to Bevel with One Button Press
  • Different Weld Grooves: Y Groove, V Groove, Bevel Square Bevel, X Groove, Different Thicknesses

Oxy Fuel Cutting System Features

  • Multi head oxy fuel cutting possibility
  • Automatic torch height control
  • Automatic oxy fuel ignition
  • Automatic or manual CNC gas control (console)
  • Quickly switching between Plasma and Oxy mode on the keyboard
← Previous

Related Products